<noframes id="tp399"><form id="tp399"><nobr id="tp399"></nobr></form>

      <form id="tp399"><th id="tp399"><progress id="tp399"></progress></th></form>

        學術堂首頁 | 文獻求助論文范文 | 論文題目 | 參考文獻 | 開題報告 | 論文格式 | 摘要提綱 | 論文致謝 | 論文查重 | 論文答辯 | 論文發表 | 期刊雜志 | 論文寫作 | 論文PPT
        學術堂專業論文學習平臺您當前的位置:學術堂 > 參考文獻

        夾具設計論文英文參考文獻(優選文獻89個)

        來源:未知 作者:萬老師
        發布于:2021-09-10 共15452字

          夾具設計是指零件圖設計,在有些待加工區域,如鉆孔,銑端面,锪平面等,根據要求設計出相關的夾具,保證工件在滿足定位和夾緊的前提下加工出符合圖紙技術要求的工件。下面我們就為大家介紹一些夾具設計論文英文參考文獻,供給大家參考。

          一、夾具設計論文英文參考文獻

          [1]Longxing Liao,Peili Gao,Xiangdong Meng,Zhaohang Meng,Wenxiang Xie,Zhenyu Zhang. Design of Integrated Impeller Processing Fixture and Force Analysis of Key Parts[A]. 香港環球科研協會。Proceedings of 2019 2nd International Conference on Advanced Electronic Materials, Computers and Materials Engineering(AEMCME 2019)[C].香港環球科研協會:香港環球科研協會,2019:6.

          [2]Qiang Yu,Wencai Wu,Qiu Li,Shikuan Wang. Research and Practice of University Students' Crowdsourcing Strategy in Automotive Fixture Design[A]. Thammasat University、Xi'an University of Posts &amp; Telecommunications.Proceedings of the 3rd International Conference on Education,E-learning and Management Technology(EEMT2018)(Advances in Social Science,Education and Humanities Research,VOL.220)[C].Thammasat University、Xi'an University of Posts &amp; Telecommunications:濟南冠平會議服務有限公司,2018:5.

          [3]Yu-cheng FU,Zhi-tao CAI,Bin WANG,Xin HUANG,Shan REN. Vehicle High-speed Drive Motor Vibration Fixture Design and Simulation Analysis[A]. Science and Engineering Research Center.Proceedings of 2018 3rd International Conference on Computational Modeling, Simulation and Applied Mathematics (CMSAM 2018)[C].Science and Engineering Research Center:Science and Engineering Research Center,2018:7.

          [4]Cui Wenbo,Li Xinkai,Meng Chenggong,XIA Tenghui. Design and Research of Pneumatic Fixture Based on Automotive Sheet Metal Parts[A]. 南洋理工大學、香港環球科研協會。2018年先進電子材料、計算機與材料工程國際學術會議論文集(AEMCME 2018)[C].南洋理工大學、香港環球科研協會:香港環球科研協會,2018:4.

          [5]Ai-ping WANG,Hui-ting CHOU,Yan-jun CHEN,Yu-ping ZHAO. Special Fixture Design and Precision Measurement of Automobile Flange Fork[A]. Advanced Science and Industry Research Center.Proceedings of 2018 International Conference on Energy, Power and Materials Engineering (EPME 2018)[C].Advanced Science and Industry Research Center:Science and Engineering Research Center,2018:9.

          [6]DONG Zhen-jie,ZHENG Chen-yao. A universal fixture design of box-type equipments on warship board[A]. AEIC Academic Exchange Information Centre(China)。Proceedings of the 2018 3rd International Conference on Advances in Materials,Mechatronics and Civil Engineering(ICAMMCE 2018)(Advances in Engineering Research VOL.162)[C].AEIC Academic Exchange Information Centre(China):International Conference on Humanities and Social Science Research,2018:4.

        夾具設計.png

          [7]Tinghui Ma. Design and Application of the Variable Angle Clamp[A]. Information Engineering Research Institute, USA、Asia Pacific Human-Computer Interaction Research Center, Hong Kong.Proceedings of 2017 6th International Conference on Manufacture Engineering,Quality and Production System(ICMEQP 2017 V11)[C].Information Engineering Research Institute, USA、Asia Pacific Human-Computer Interaction Research Center, Hong Kong:智能信息技術應用學會,2017:4.

          [8]Tinghui Ma. Research and Design of Positioning Fixture for Processing Sheet Metal Workpiece[A]. Information Engineering Research Institute, USA、Singapore Management and Sports Science Institute, Singapore.Proceedings of 2017 4th International Symposium on Computer, Communication, Control and Automation (3CA 2017)[C].Information Engineering Research Institute, USA、Singapore Management and Sports Science Institute, Singapore:智能信息技術應用學會,2017:4.

          [9]Bo Yang,Zhongqi Wang,Yuan Yang,Yonggang Kang. Optimal fixture locating layout design for sheet metal based on BA and FEA[A]. AEIC Academic Exchange Information Centre,China、中國礦業大學。Proceedings of The 2016 2nd International Conference on Energy Equipment Science and Engineering(Advances in Energy Science and Equipment Engineering Vol.2)[C].AEIC Academic Exchange Information Centre,China、中國礦業大學:International Conference on Humanities and Social Science Research,2016:5.

          [10]Mohan Ji,Yuan Wang,Guangyi Lu,Xinan Wang. Area-Saved and Low-Leakage Design of Power-Rail Clamp Circuit[A]. IEEE Beijing Section.2016 13th IEEE International Conference on Solid-State and Integrated Circuit Technology(ICSICT) Proceedings[C].IEEE Beijing Section:IEEE BEIJING SECTION(跨國電氣電子工程師學會北京分會),2016:3.

          [11]Jian Wang,Jian Cao,Guangyi Lu,Xing Zhang,Yuan Wang. A New Static Power Clamp Co-designed with Input ESD Protection Circuit[A]. IEEE Beijing Section.2016 13th IEEE International Conference on Solid-State and Integrated Circuit Technology(ICSICT) Proceedings[C].IEEE Beijing Section:IEEE BEIJING SECTION(跨國電氣電子工程師學會北京分會),2016:3.

          [12]Wu Jingze,Zheng Wenyuan,Zhao Pengtao. Design and Mode Analysis of Random Vibration Test Fixture of Some Airborne Heat Exchanger[A]. 中國航空學會航空機電、人體與環境工程分會、飛行器控制一體化技術重點實驗室、美國電氣與電子工程師協會控制系統協會南京分會。Proceedings of 2016 IEEE/CSAA International Conference on Aircraft Utility Systems(AUS)[C].中國航空學會航空機電、人體與環境工程分會、飛行器控制一體化技術重點實驗室、美國電氣與電子工程師協會控制系統協會南京分會:中國航空學會,2016:4.

          [13]Xuelin Wang,Yongfei Xiao,Xinjian Fan,Yongguo Zhao. Design and Grip Force Control of Dual-motor Drive Electric Gripper with Parallel Fingers[A]. IEEE Beijing Section、Global Union Academy of Science and Technology、Chongqing Global Union Academy of Science and Technology.Proceedings of 2016 IEEE Information Technology,Networking,Electronic and Automation Control Conference(ITNEC 2016)[C].IEEE Beijing Section、Global Union Academy of Science and Technology、Chongqing Global Union Academy of Science and Technology:IEEE BEIJING SECTION(跨國電氣電子工程師學會北京分會),2016:5.

          [14]Cao Lifang,Liu Cunxiang,Zhang Chuangchuang. Structure design and simulation of plug-seedling gripping device[A]. 國際工學技術出版協會。Abstracts of International Conference on Mechanics, Materials and Structural Engineering 2016[C].國際工學技術出版協會:國際工學技術出版協會,2016:1.

          [15]Jin Fengfeng,Wang Guodong. Synchronous Optimization Design of Fixture Layout and Clamping Force Based on UG[A]. 信息化與工程國際學會。Proceedings of 2016 3rd International Conference on Materials Engineering,Manufacturing Technology and Control(ICMEMTC 2016)[C].信息化與工程國際學會:計算機科學與電子技術國際學會(Computer Science and Electronic Technology International Society),2016:6.

          [16]Chuiyuan Zeng,Shaohui Su. Design Clamping Device of Milling Fixture Base on Contradiction Matrix[A]. International Informatization and Engineering Associations、Atlantis Press.Proceedings of 2015 3rd International Conference on Machinery,Materials and Information Technology Applications (ICMMITA 2015)[C].International Informatization and Engineering Associations、Atlantis Press:計算機科學與電子技術國際學會(Computer Science and Electronic Technology International Society),2015:6.

          [17]Panpan Zhang,Chen Xie,Haibo Fei. Twist Lock Unlocking Process Research and Unlocking Fixture Design in Container Terminals[A]. 信息化與工程國際學會。Proceedings of 2015 4th International Conference on Computer,Mechatronics,Control and Electronic Engineering(ICCMCEE 2015)[C].信息化與工程國際學會:計算機科學與電子技術國際學會(Computer Science and Electronic Technology International Society),2015:5.

          [18]Y.Q.Zhou,B.Z.Li,Q.X.Wang,Y.Zhang. Study on the Fixture Analysis and Configuration Method for Computer-aided Modular Fixture Design[A]. Science and Engineering Research Center.Proceedings of 2015 International Conference on Electrical, Automation and Mechanical Engineering(EAME 2015)[C].Science and Engineering Research Center:Science and Engineering Research Center,2015:4.

          [19]Junhua Zhao. The Synchronous Optimization Design of Fixture Layout and Clamping Force based on UG[A]. 信息化與工程國際學會。Proceedings of 2015 International Conference on Automation,Mechanical Control and Computational Engineering(AMCCE 2015)[C].信息化與工程國際學會:計算機科學與電子技術國際學會(Computer Science and Electronic Technology International Society),2015:6.

          [20]Rongqiang DONG. NEW FIXTURE FOR ELECTROMAGNETIC VALVE AND STEERING MECHANISM DESIGN[A]. 香港新世紀文化出版社有限公司。International Journal of Intelligent Information and Management Science(Volume 4,Issue 2,April 2015)[C].:香港新世紀文化出版社有限公司,2015:4.

          [21]Zhihan Zhu,Hang Cao. Based on CATIA car side welding fixture design and research[A]. Wuhan Zhicheng Times Cultural Development CoSelected,Peer Reviewed Papers from the 2014 International Conference on Vehicle,Mechanical and Electrical Engineering(ICVMEE 2014 V721)[C].Wuhan Zhicheng Times Cultural Development Co.:武漢志誠時代文化發展有限公司,2014:4.

          [22]Liu Bin,Li Shaohua,Qi Dongyang,Zhang Zhihong,Qu Anlian,Chai Zuyin,Wang Li,Wu Qihui,Liu Bing,Zhou Zhuan. Design and application of remote-micro manipulators for patch-clamp recordings[A]. 中國生物物理學會神經生物學專業委員會。第十屆全國鈣信號和細胞功能研討會摘要集[C].中國生物物理學會神經生物學專業委員會:中國生物物理學會,2014:1.

          [23]Guoliang Zhang,Xiaona Cai,Zhentao Zhang,Liu Zhijun,Sun Zhaobin. Optimization Design of Jigs used in Biomass Mould Pressing based on BP Network and GA[A]. IEEE Beijing Section、China Energy Society.Proceedings of 2013 International Conference on Materials for Renewable Energy and Environment[C].IEEE Beijing Section、China Energy Society:IEEE BEIJING SECTION(跨國電氣電子工程師學會北京分會),2013:4.

          [24]Yen-Lei Wu,Chen-Fu Huang,Yu-Chuan Liu,Christian Marquart. GOLF PUTTING GRIP DESIGN INFLUENCES ON PUTTING KINEMATICS[A]. International society of Biomechanics in sports、National Taiwan Normal University、Taiwan Society of Biomechanics in sports、Taiwanese Society of  Biomechanics.Proceedings of the 31st Conference of the International Society of Biomechanics in Sports(ISBS 2013)[C].International society of Biomechanics in sports、National Taiwan Normal University、Taiwan Society of Biomechanics in sports、Taiwanese Society of  Biomechanics:中國體育科學學會,2013:1.

          [25]Sripathi Raja .J,Siva Prakash .M,Vellaichamy .N,Senthil Kumar .K .L. Designing a Fixture for Rear Air Suspension Sub- Assembly of Semi Low Floor Vehicles in New Chassis Assembly Line[A]. Planetary Scientific Research Center;Planetary Scientific Research Center;Planetary Scientific Research Center;Planetary Scientific Research Center;Planetary Scientific Research Center;Planetary Scientific Research Center.Planetary Scientific Research Center Conference Proceedings Volume 31[C].Planetary Scientific Research Center;Planetary Scientific Research Center;Planetary Scientific Research Center;Planetary Scientific Research Center;Planetary Scientific Research Center;Planetary Scientific Research Center:Planetary Scientific Research Center,2013:5.

          [26]LIU Yan,BAI Jun-qiang,HUA Jun. Static Aeroelasticity Analysis of High Aspect Ratio Wing and the Jig-Shape Design based on Multi-block Structural Grid[A]. Hong Kong Education Society.Proceedings of 2013 International Conference on Mechanical Engineering and Materials(ICMEM 2013)[C].Hong Kong Education Society:智能信息技術應用學會,2013:7.

          [27]Deyi Zheng,Min Luo,Shanshan Yang. Design of a Mechanical Exoskeleton System for Improving Hand-Gripping Force[A]. Information Engineering Research Institute, USA.Proceedings of 2012 International Conference of Health,Structure,Material and Environment(HSME 2012 V663)[C].Information Engineering Research Institute, USA:智能信息技術應用學會,2012:5.

          [28]Yun He,FaPing Zhang,ZhanChun Sun,Bo Gao,Juan Han. A Case Retrieval Method in Case-based Fixture Design[A]. Information Engineering Research Institute, USA.Proceedings of 2nd International Conference on Advanced Materials and Information Technology Processing(AMITP 2012 Ⅱ)[C].Information Engineering Research Institute, USA:智能信息技術應用學會,2012:6.

          [29]Jin Woo Ok,Sun O Park,Jae Young Joo,Sang Bin Song,Jae Pil Kim,Ki Hoon Kim,Wan Ho Kim,Jin Pyo Hong,Joung Wook Park. THE DESIGN OF CUT-OFF FIXTURE IN THE LUMINARIES TO REDUCE THE GLARE OF BOLLARD-TYPED LED GUIDE LIGHTING FOR CROSSWALK[A]. 中國照明學會、日本照明學會、韓國照明電器設備學會。Proceedings of 4th Lighting Conference of China,Japan and Korea[C].中國照明學會、日本照明學會、韓國照明電器設備學會:中國照明學會,2011:5.

          [30]Radostina Petrova,Penka Genova,Kostadin Kostadinov. Design of Special Clamp for Manipulating with Tools,Micro and Nano Objects[A]. University Politehnica of Bucharest.Proceedings of International Conference on Optimization of the Robots and Manipulators(OPTIROB 2011)[C].University Politehnica of Bucharest:成都亞昂教育咨詢有限公司,2011:5.

          [31]Cui-yu Li,Rui Wang,Cui-yu Li,Rui Wang. The Research and Application of Case-based Reasoning in Fixture Design[A]. Intelligent Information Technology Application Association.Proceedings of 2011 2nd Asia-Pacific Conference on Wearable Computing Systems(APWCS 2011 V2)[C].Intelligent Information Technology Application Association:智能信息技術應用學會,2011:4.

          [32]Kong xiaoling,Yangyi,Zhou jie,Guo chen,Zhang hua,Zhao wenlong Faculty of Technology Anhui Agricultural University Hefei,230036,China. Research and Development of the Software on Computer-Aided Fixtures Designing[A]. IEEE Beijing Section,China、IEEE Nanjing Section,China、Zhejiang University,China、Wenzhou University,China、Industrial Design Branch of China Mechanical Engineering Society.Proceedings of 2009 IEEE 10th International Conference on Computer-Aided Industrial Design &amp; Conceptual Design[C].IEEE Beijing Section,China、IEEE Nanjing Section,China、Zhejiang University,China、Wenzhou University,China、Industrial Design Branch of China Mechanical Engineering Society:IEEE BEIJING SECTION(跨國電氣電子工程師學會北京分會),2009:4.

          [33]Junhua ZHANG. Research on Based System Design for Automotive Body Welding Jig[A]. 南京理工大學機械工程學院。Proceedings of the 3rd International Conference on Mechanical Engineering and Mechanics(Volume 2)[C].南京理工大學機械工程學院:南京理工大學機械工程學院,2009:6.

          [34]HUANG Jinxia 1, WANG Junfa 1 , YU Yonghong 1 1Institute of Mechanical Engineering, Jiamusi University, Jiamusi, Heilongjiang Province, P. R.China 154007. The Design of the Automatic Control System of the Gripping-Belt Speed in Long-rootstalk Traditional Chinese Herbal Havester[A]. China Agricultural University(中國農業大學)、China National Engineering Research Center for Information Technology in Agriculture(國家農業信息化工程技術研究中心)、Asian Conference on Precision Agriculture(亞洲精細農業聯合會)、International Federation for Information Processing,Luxemburg(國際信息處理聯合會)、Chinese Society of Agricultural Engineering,China(中國農業工程學會)、Beijing Society for Information Technology in Agriculture,China(北京農業信息化學會)、Chinese Society for Agricultural Machinery(中國農業機械學會)。Proceedings of the Joint International Agricultural Conference[C].China Agricultural University(中國農業大學)、China National Engineering Research Center for Information Technology in Agriculture(國家農業信息化工程技術研究中心)、Asian Conference on Precision Agriculture(亞洲精細農業聯合會)、International Federation for Information Processing,Luxemburg(國際信息處理聯合會)、Chinese Society of Agricultural Engineering,China(中國農業工程學會)、Beijing Society for Information Technology in Agriculture,China(北京農業信息化學會)、Chinese Society for Agricultural Machinery(中國農業機械學會):現代精細農業系統集成研究教育部重點實驗室,2009:1.

          [35]Jinxia Huang,Junfa Wang,Yonghong Yu. The Design of the Automatic Control System of the Gripping-Belt Speed in Long-Rootstalk Traditional Chinese Herbal Harvester[A]. 中國農業大學、中國農業工程學會、北京農業信息化學會。第三屆國際計算機與計算技術在農業中的應用研討會論文集[C].中國農業大學、中國農業工程學會、北京農業信息化學會:中國農業大學北京市農業物聯網工程技術研究中心,2009:8.

          [36]Biqiong Li~1 Jie Li~2 1 School of auto-machine,ChangSha University of Science and Technology,China Huayun Machine Factory of Hunan Province,China. Research for Conceptual Design of Drilling Fixture Based on Fuzzy Algorithm[A]. IEEE Beijing Section、Zhejiang University,China、Yunnan University,China、Industrial Design Institution、the Chinese Mechanical Engineering Society,China.Proceedings of 2008 IEEE 9th International Conference on Computer-Aided Industrial Design &amp; Conceptual Design Vol.1[C].IEEE Beijing Section、Zhejiang University,China、Yunnan University,China、Industrial Design Institution、the Chinese Mechanical Engineering Society,China:中國機械工程學會工業設計分會,2008:4.

          [37]Weifang Chen,Hua Chen,Lijun Ni and Jianbin Xue Nanjing University of Aeronautics and Astronautics,No.29,Yudao Street,Nanjing 210016 China. A Dual Optimization Model of Fixture Design for the Thin-walled Workpiece[A]. China Computer Federation.Proceedings of 2007 10th IEEE International Conferences on Computer Aided Design and Computer Graphics(CAD/Graphics 2007)[C].China Computer Federation:IEEE BEIJING SECTION(跨國電氣電子工程師學會北京分會),2007:4.

          [38]Wang Yi Yang Jianguo Li Beizhi Advanced Manufacturing Technology Research Center College of Mechanical Engineering,University of Donghua,Shanghai,P.R.China,201620. Surrogate Modeling in Fixture Layout Design for Multi-Station Sheet Metal Assembly(ID:C-014)[A]. Chinese Mechanical Engineering Society(CMES)、Tianjin University.The Proceedings of the 14th International Conference on Industrial Engineering and Engineering Management(Volume A)[C].Chinese Mechanical Engineering Society(CMES)、Tianjin University:中國機械工程學會,2007:5.

          [39]a Kailing LI, a Ran LIU, a Guiheng BAI, b Peng ZHANG a School of Mechanical Engineering, Shandong University 73, Jingshi Road, Jinan, Shandong, P·R·China, 250061 b School of Mechanical Engineering, Weifang University. Development of an Intelligent Jig and Fixture Design System[A]. Zhejiang University,China、CAD&amp;CG Association,The Chinese Computer Association,China、Industrial Design Institution,The Chinese Mechanical Engineering Society,China.Digital Techniques·Humanized Design·Regional Autonomous Innovation-CAID&amp;CD'2006[C].Zhejiang University,China、CAD&amp;CG Association,The Chinese Computer Association,China、Industrial Design Institution,The Chinese Mechanical Engineering Society,China:IEEE BEIJING SECTION(跨國電氣電子工程師學會北京分會),2006:5.

          [40]Qin guohua, Zhang weihong, Wu zhuxi, Wan min Dept. of Mechanical Engineering, Nanchang Institute of Aeronautical Technology, 330034, Nanchang, China Sino-French Laboratory of Concurrent Engineering, Northwestern Polytechnical Universit, 710072, Xi 'an, China. Analysis and optimum design of fixture clamping scheme[A]. The Chinese Association of Computational Mechanics、Dalian University of Technology,China、State Key Laboratory of Structural Analysis for Industrial Equipment,China、Natural Science Foundation of China EtcProceedings of the Fourth China-Japan-Korea Joint symposium on Optimization of Structural and Mechanical Systems[C].The Chinese Association of Computational Mechanics、Dalian University of Technology,China、State Key Laboratory of Structural Analysis for Industrial Equipment,China、Natural Science Foundation of China Etc.:大連理工大學,2006:6.

          [41]GUO Hong, YAN Xianguo, LI Jianwei Taiyuan University of Science and Technology, Taiyuan 030024, China. THE STUDY OF A VIRTUAL MODULAR FIXTURE MANAGEMENT AND AID-DESIGN SYSTEM[A]. Institution of Engineering and Technology、Chinese Mechanical Engineering Society.Proceedings of International Technology and Innovation Conference 2006[C].Institution of Engineering and Technology、Chinese Mechanical Engineering Society:中國機械工程學會,2006:1.

          [42]Li Bing, Tang Hui and Hu Ying Department of Mechanical Engineering &amp; Automation, Shenzhen Graduate School, Harbin Institute of Technology. FIXTURE CONFIGURATION DESIGN FOR SHEET METAL ASSEMBLY WITH AN NN-ENHANCED RESPONSE SURFACE METHODOLOGY[A]. 中國國家自然科學基金委員會、吳賢銘基金會(美國)、中國機械工程學會。面向節約型社會和可持續發展的先進設計與制造--第七屆海內外青年設計與制造科學會議論文集(第一卷)[C].中國國家自然科學基金委員會、吳賢銘基金會(美國)、中國機械工程學會:中國機械工程學會,2006:4.

          [43]HAN Dong-Seop,HAN Geun-Jo,LEE Kwon-Hee,LEE Jung-Myung. Design of the various wedge type rail clamp for quay crane according to the design wind speed criteria changes[A]. 中國航海學會。Proceedings of Asia Navigation Conference 2005[C].中國航海學會:中國航海學會,2005:10.

          [44]Y. Kang and Y. Rong Computer-aided Manufacturing Laboratory, Worcester Polytechnic Institute, Worcester, MA 01609, USA. Computer-aided fixture design verification[A]. 大連理工大學。第五屆海內外青年設計與制造科學會議論文集(第一卷)[C].大連理工大學:大連理工大學,2002:7.

          [45]Huang Wei Xie Cunxi (South China University of Technology,Guangzhou,China,510641) Huang Yunyao (Guangdong University of Technology,Wushan,Guangzhou,China,510643)。 RESEARCH AND DESIGN OF THE RECONFIGURABLE COMPLIANT FIXTURE IN THE ROBOT FLEXIBLE ASSEMBLY SYSTEM[A]. The Chinese Society of Aeronautics and Astronautics、The Chinese Society of Mechanical Engineering、Beijing University of Aeronautics and Astronautics、JSME Machine Design and Tribology Division(Participation)。Machine Elements--Proceedings of the Second China/Japan International Symposium on Machine Elements[C].The Chinese Society of Aeronautics and Astronautics、The Chinese Society of Mechanical Engineering、Beijing University of Aeronautics and Astronautics、JSME Machine Design and Tribology Division(Participation):中國機械工程學會機械史分會,1996:7.

          [46]Yong Bai,Yiming(Kevin)Rong,Gary J.Butson. Computer Automated Design of Modular Fixture Configurations[A]. Chinese-American Society of Electronics and Information Technology(CASEIT)、The Chinese Institute of Electronics(CIE)。Proceedings of International Conference on Electronics and Information Technology[C].Chinese-American Society of Electronics and Information Technology(CASEIT)、The Chinese Institute of Electronics(CIE):IEEE BEIJING SECTION(跨國電氣電子工程師學會北京分會),1994:6.

          [47]Rachel Eardley,Anne Roudaut,Steve Gill,Stephen J. Thompson. Designing for Multiple Hand Grips and Body Postures within the UX of a moving Smartphone[P]. Designing Interactive Systems Conference 2018,2018.

          [48]Yanni Kouskoulas,David Renshaw,André Platzer,Peter Kazanzides. Certifying the safe design of a virtual fixture control algorithm for a surgical robot[P]. Hybrid systems: computation and control,2013.

          [49]M. H. Yadav,S. S. Mohite. Computer integrated fixture design system[P]. Emerging Trends in Technology,2011.

          [50]Yu Zheng,Ming C. Lin,Dinesh Manocha. Efficient simplex computation for fixture layout design[P]. Solid and Physical Modeling,2010.

          [51]AI-PING WANG,HUI-TING CHOU,YAN-JUN CHEN,YU-PING ZHAO. Special Fixture Design and Precision Measurement of Automobile Flange Fork[P]. DEStech Transactions on Environment, Energy and Earth Sciences,2018.

          [52]Yu-cheng FU,Zhi-tao CAI,Bin WANG,Xin HUANG,Shan REN. Vehicle High-speed Drive Motor Vibration Fixture Design and Simulation Analysis[P]. DEStech Transactions on Computer Science and Engineering,2018.

          [53]Canrong Qian, Jieshan Fan. Design and Manufacture of the New-type Fixture of Efficient Automatic Feeding Pipe Cutting Machine[P]. 2015 2nd In ter na tional Con fer ence on Mechatronic Sys tems and Ma te ri als Ap pli ca tion (ICMSMA 2015),2015.

          [54]Iain M. Boyle,Kevin Rong,David C. Brown. Case-based reasoning in fixture design[P]. SPIE Optics East,2004.

          [55]Weizhao Shi,Lijie Wang,Dekai Xu. Design of the standard part library of modular fixture based on Pro/TOOLKIT[P]. Other Conferences,2015.

          [56]Dewei Chen,Yaodong Cheng,Xiaohong Pang,Ting Chen,Chunguang Li. Research on the architecture and modeling method of a fixture intelligent computer-aided design system[P]. Other Conferences,1995.

          [57]Sertac Pehlivan,Joshua D. Summers,Yong Huang. Representation requirements for supporting intelligent fixture design retrieval and reuse[P]. SPIE Optics East,2004.

          [58]Susan Dandridge. Fixture Design for Motion Picture and Theatrical Lighting[P]. Optics &amp; Photonics,1987.

          [59]John J. Bausch. Turbine blade fixture design using kinematic methods and genetic algorithms[P]. SPIE Optics East,2000.

          [60]Y. Rong,Y. Bai,Y. Zhu,Zhen-Bi Luo. Computer-automated fixture configuration design[P]. Other Conferences,1995.

          [61]Yimin Gu,Nadarajah Narendran. Design and evaluation of an LED-based light fixture[P]. SPIE Optics + Photonics,2004.

          [62]David M. Dozor. Magnetostrictive wire-bonding clamp for semiconductor packaging: initial prototype design, modeling, and experiments[P]. Smart Structures,1998.

          [63]S.J. Lee,K.S. Kim,S. Cho,J.J. Jang,T.H. Lee,J.P. Hong. Optimal Design of the Magnetizing fixture using Taguchi Robust Design in the ring-type PMSM[P]. 7th IET International Conference on Power Electronics, Machines and Drives (PEMD 2014),2014.

          [64]J. Kincaid,C. Dole. Test fixture design and shielded screening attenuation performance of CATV coaxial cable[P]. IEE Colloquium on Screening Effectiveness Measurements,1998.

          [65]Vitalii Ivanov,Ivan Pavlenko. Comprehensive Approach for Mathematical Modeling of Mechanical Systems: Fixture Design Case Study[P]. 2nd EAI International Conference on Management of Manufacturing Systems,2018.

          [66]Shihao Yin,Junle Lei,Bohan Xu. Design of Special Fixture for Double-Sided Drilling of Box Parts[P]. Intelligent Information Processing,2019.

          [67]Bai Yong,Rong Yiming (Kevin)。 Automated Generation of Fixture Configuration Design[P]. ASME 1995 Design Engineering Technical Conferences collocated with the ASME 1995 15th International Computers in Engineering Conference and the ASME 1995 9th Annual Engineering Database Symposium,1995.

          [68]Rong Yiming (Kevin),Wu Sheng hua,Chu T. Philip. Automated Verification of Clamping Stability in Computer-Aided Fixture Design[P]. ASME 1994 International Computers in Engineering Conference and Exhibition and the ASME 1994 8th Annual Database Symposium collocated with the ASME 1994 Design Technical Conferences,1994.

          [69]Perremans P Feature Based Description of Modular Fixturing Elements: The Key to an Expert System for the Automatic Design of the Physical Fixture[P]. ASME 1994 International Computers in Engineering Conference and Exhibition and the ASME 1994 8th Annual Database Symposium collocated with the ASME 1994 Design Technical Conferences,1994.

          [70]Wang Michael Yu. Automated 3D Fixture Layout Design[P]. ASME 1999 Design Engineering Technical Conferences,1999.

          [71]Nederbragt Walter W.,Ravani Bahram. Design of a Novel Fixture for Part Referencing[P]. ASME 1998 Design Engineering Technical Conferences,1998.

          [72]Ma W.,Lei Z.,Rong Y FIX-DES: A Computer-Aided Modular Fixture Configuration Design System[P]. ASME 1997 Design Engineering Technical Conferences,1997.

          [73]S?derberg Rikard,Carlson Johan S Locating Scheme Analysis for Robust Assembly and Fixture Design[P]. ASME 1999 Design Engineering Technical Conferences,1999.

          [74]Rong Y.,Li W.,Bai Y Locating Error Analysis for Computer-Aided Fixture Design and Verification[P]. ASME 1995 15th International Computers in Engineering Conference and the ASME 1995 9th Annual Engineering Database Symposium collocated with the ASME 1995 Design Engineering Technical Conferences,1995.

          [75]Nederbragt Walter W.,Ravani Bahram. Design of Tactile Fixtures for Robotics and Manufacturing[P]. ASME 1996 Design Engineering Technical Conferences and Computers in Engineering Conference,1996.

          [76]Prombanpong S.,Lewis R. L.,Bishop A. B A Computer-Aided Fixture Design System With Process Planning Integration for Prismatic Parts Manufactured on CNC Machining Centers[P]. ASME 1992 International Computers in Engineering Conference and Exposition,1992.

          [77]Y.Q. Zhou,B.Z. Li,Q.X. Wang,Y. Zhang. Study on the Fixture Analysis and Configuration Method for Computer-aided Modular Fixture Design[P]. Proceedings of the 2015 International Conference on Electrical, Automation and Mechanical Engineering,2015.

          [78]Liu Yan,Yi Huahui,Zhang Ruijie. Design and Simulation of Adjustable Jig for Shaft Hole Parts[P]. Proceedings of the 2019 International Conference on Precision Machining, Non-Traditional Machining and Intelligent Manufacturing (PNTIM 2019),2019.

          [79]Chuiyuan Zeng,Shaohui Su. Design Clamping Device of Milling Fixture Base on Contradiction Matrix[P]. Proceedings of the 2015 3rd International Conference on Machinery, Materials and Information Technology Applications,2015.

          [80]Luqian Duan,Xueguo An,Junwen Xing. A Design for Portable Camera Fixture with Multiple Degrees of Freedom[P]. Proceedings of the 2016 International Forum on Energy, Environment and Sustainable Development,2016.

          [81]Junhua Zhao. The Synchronous Optimization Design of Fixture Layout and Clamping Force based on UG[P]. Proceedings of the 2015 International Conference on Automation, Mechanical Control and Computational Engineering,2015.

          [82]Lifang Cao,Chuangchuang Zhang. Structure design and Simulation of Plug-seedling gripping device[P]. Proceedings of the 2016 International Conference on Mechanics, Materials and Structural Engineering,2016.

          [83]Zhen-jie Dong,Chen-yao Zheng. A universal fixture design of box-type equipments on warship board[P]. Proceedings of the 2018 3rd International Conference on Advances in Materials, Mechatronics and Civil Engineering (ICAMMCE 2018),2018.

          [84]Fengfeng Jin,Guodong Wang. Synchronous Optimization Design of Fixture Layout and Clamping Force Based on UG[P]. Proceedings of the 2016 3rd International Conference on Materials Engineering, Manufacturing Technology and Control,2016.

          [85]Liu Yan,Yi Huahui,Zhang Ruijie. Design and Simulation of Adjustable Jig for Shaft Hole Parts[P]. Proceedings of the 2019 International Conference on Precision Machining, Non-Traditional Machining and Intelligent Manufacturing (PNTIM 2019),2019.

          [86]Ping Yu,Si-jie Kang,Yan-jiao Li,En-chao Jin. Simulation Analysis and Optimal Design of Back Clamp Device[P]. Proceedings of the 3rd International Conference on Material Engineering and Application (ICMEA 2016),2016.

          [87]PanPan Zhang,Chen Xie,Haibo Fei. Twist Lock Unlocking Process Research and Unlocking Fixture Design in Container Terminals[P]. Proceedings of the 2015 4th International Conference on Computer, Mechatronics, Control and Electronic Engineering,2015.

          [88]Liu Xu,Chao Ma,Xia Xie. Design of Automobile Body Welding Fixture[P]. mmat-12,2012.

          [89]Qiang Yu,Wencai Wu,Qiu Li,Shikuan Wang. Research and Practice of University Students' Crowdsourcing Strategy in Automotive Fixture Design[P]. Proceedings of the 2018 3rd International Conference on Education, E-learning and Management Technology (EEMT 2018),2018.

          以上就是"夾具設計論文英文參考文獻(優選文獻89個)"的全部介紹,希望對大家寫作夾具設計論文時有所參考作用。

        相關標簽:
        • 報警平臺
        • 網絡監察
        • 備案信息
        • 舉報中心
        • 傳播文明
        • 誠信網站
        亚洲欧美强伦一区二区